Circle With 6 Equal Parts

Download Commodity

Download Article

There are a number of dissimilar means to divide circle into equal parts. If you are using a pencil and paper, you lot will need a compass to carve up the circle accurately into six equal pieces. If you need to split up the circle for graphic design purposes, y'all may want to use Adobe Illustrator or InDesign. Although these programs are similar, the methods to divide the circle are unique to each program.

1
Describe a circle with the compass. Align the pencil tip with the tip of the needle. Place the point of the compass downwardly on the paper. Set the distance between the pencil and needle equal to the radius of the circle that you would like and draw. Swing the compass around 360° to consummate the circle.^[1]
- Make sure the hinge is tight then it doesn't skid while cartoon.
- Also make sure the pencil is securely in its holder so it also doesn't move while drawing.
- This first circumvolve is the main circumvolve that you lot will be dividing.
two
Draw a second circle whose heart is the edge of the offset circle. Place the needle of the compass at any point forth the border of the main circle. Go on the distance between the needle and pencil the same as the first circle. Swing the compass effectually to complete the second circle.^[two]
- The second circle should overlap with the beginning circle and the border should cantankerous through the heart of the beginning circle.
- If the distance between the needle and the pencil changes at all, the circumvolve will not be divided equally.
Advertisement
three
Employ the intersection of the first and 2d circle to draw a 3rd circle. Place the needle at the intersection of the first and second circle. There are two intersections and you tin can utilise either one; this will be the center of a third circle. Utilize the compass to complete the third circumvolve.^[3]
- Once again, keep the compass at the same distance for every circumvolve you draw.
- At this point you should have three overlapping circles. You should detect that the two outer circles overlap with the center of the first main circumvolve.
4
Describe a fourth circumvolve using the intersection of the chief circumvolve and the tertiary circle. Just equally you did to describe the second and third circumvolve, utilize the intersection of the tertiary circle with the chief circle as the heart betoken. Retrieve, going clockwise around the circumvolve, y'all volition use the intersection to the left of the circle. Place the compass on that intersection and draw a fourth circle.^[4]
- You are halfway done with drawing circles.
5
Describe three more circles using the next intersection of each circle. Using the intersection of the previously drawn circle with the master circle every bit the heart, draw the next circle. Continue the next three circles until you have a total of six circles all around the main circle.^[5]
- The inside of your original circumvolve should now expect like a six petaled flower.
half-dozen

Use a ruler to draw a straight line through the center of the circle. This is the showtime of three lines you volition demand to draw to split the circle into 6 parts. Every line, including this i, should cross the exact center of the circle and divide ii of the six inner "blossom petals" of your drawing in one-half.
7

Describe another straight line one flower petal (or 60 degrees) clockwise from the first. This line will bisect two opposite flower petals and volition go through the exact center of the circle.^[6]
eight

Draw your final straight line one more than flower petal (or 60 degrees) clockwise from the last. You now have a circle divided into 6 equal parts.

1
Depict a line through the center of the circle. The starting time step to dividing the circle is cut information technology directly in one-half. Cull a point anywhere along the circumvolve and depict a line through the eye of the circle to the opposite stop. The circle is now divided into two equal pieces.
- This method works well if you are trying to cutting a pie or a cake.
2
Draw ii more lines that divide one half of the circle into thirds. Side by side, you desire to depict two lines that cutting the half into thirds. You tin approximate this by dividing i half of the cake into three equal pieces.^[7]
- Go as close to 3 equal pieces as possible. Once again, this method is but an approximation.
iii
Extend those lines into the other one-half of the circle. Continue both of those lines through the center of the circle to the opposite side of the circumvolve. If done correctly, the circle should now be divided into six approximately equal parts.
- This method is not exact, but is an easy way to divide the circle into 6 equal parts past center.

1

Launch Adobe Illustrator. If you accept a shortcut on your desktop, you can open the application by double-clicking on this icon. If you don't accept a shortcut, employ the start carte or search for the application and open information technology from the search bar.
two
Locate the Polar Grid tool. The Polar Grid tool is one of the options in the toolbar on the left side of your screen. It is under the Line Segment group of tools. Information technology kind of looks like a spider spider web; it is a circle with divided lines through it.
- To see the tools nested underneath the Line Segment, click and hold on the Line Segment tool until a window opens with more options.
- Click on the Polar Filigree tool to activate it.
3
Click and elevate to create a circle. With the Polar Filigree tool agile, click on the canvas and drag the mouse to create the circle. You should encounter a circle appear that likely has smaller concentric circles inside it. These tin be removed after.
- While dragging, adjust the size of the circle by dragging in and out until you reach the desired size.
- Hold ⇧ Shift to snap to a perfect circumvolve.
- Keep holding ⇧ Shift and don't release the mouse click until you terminate the next stride.
four
Split into parts using the arrow keys. While dragging the circle, press on the correct pointer cardinal until y'all run across that the circle has been divided into 6 equal parts. If you accidentally press the fundamental too many times, simply push the left pointer key to decrease the number of divisions.
- When the circumvolve is the size you want and divided into 6 equal parts, you can let go of the mouse.
- If you let go of the mouse likewise early on, there is an alternative method: Keep the Polar Grid tool active (don't click back to the black arrow) and click on any whitespace in your certificate. An options menu volition pop up and you can fix the number of divisions to 6 and remove the concentric dividers by setting that option to 0.

i
Locate the Ellipse tool and create a circle. The Ellipse tool is part of the toolbar on the left side of the screen. It is a shaded ellipse. Hold down ⇧ Shift and click on the white canvas, and drag the circle to the size that you lot want.
- Release the click on the mouse and and so release ⇧ Shift to brand a perfect circle.
2
Identify both vertical and horizontal guides through the center of the circle. To place a vertical guide, click on the vertical ruler and drag right towards the circumvolve. Place the guide over the vertical middle points of the circle. To place the horizontal guide, click on the horizontal ruler and drag downwardly toward the circle.^[8]
- If the guides don't get properly placed the showtime time, you can click on them again and drag them into place.
3
Locate the Polygon Frame tool. The Polygon Frame tool is located in the left toolbar underneath the Rectangle Frame tool group.^[9] Click and hold on the Rectangle Frame tool to reveal the icons underneath. The tool looks like a hexagon with an "10" through it.
- Click on the Polygon Frame tool to brand information technology active.
- It volition now be the icon showing on the toolbar.
iv
Draw an equilateral triangle with the Polygon Frame tool. With the Polygon Frame tool selected, click onto the white canvass to open the options dialog box. Ready the number of sides to iii and click okay.^[ten] With ⇧ Shift held down, click and drag a triangle that is slightly longer than the radius of your circle.
- Don't release ⇧ Shift until after you lot let go of the mouse click. This volition ensure that you lot have made a perfect equilateral triangle.
five
Align the triangle with the eye of the circumvolve. Make sure the black arrow is selected on toolbar and click on the triangle. Drag information technology to the center of the circle and then that the bottom-left corner snaps to the center of the circumvolve.
- The right side of the triangle should hang outside the circumvolve with the bottom and left side of the triangle intersecting the circle.
6
Join the circle and the triangle into a wedge with the Intersect tool. Highlight both the triangle and the circle. With both highlighted, find the Intersect tool nested under Object>Pathfinder. After clicking Intersect, the circle should disappear and a wedge shape should appear.
- This wedge is 1-sixth of the circle.
7
Copy and rotate the wedge 60°. Highlight the wedge and right click. Click on Transform>Rotate. Ready the angle to 60° and click Copy. Once you click copy, a second wedge, rotated lx° from the original wedge, will appear.
- Align this second wedge side by side to the first wedge. You will start to run into the circle forming.
8
Echo the rotate and copy process until you have half dozen wedges. Using the second wedge you just made, right click again and rotate and copy the 2nd wedge. This will class a 3rd wedge that you can identify next to the 2nd. Repeat this with the third, fourth, and 5th wedge until y'all have vi total wedges.
- Align each wedge adjacent to the previous one until you have a perfect circle divided into vi equal parts.

Add New Question

Question

How practise I separate a circle into 4 equal parts using a gear up foursquare?

First you have to notice and marking the exact eye of the circumvolve. And so describe a straight line from one side of the circumvolve through the centre to the other side of the circle. That's a bore. Finally, employ the set up square to draw some other bore perpendicular to the first diameter. You have at present divided the circle into 4 equal quadrants.
Question

How can I divide a circle into ix equal parts?

Draw a radius. Then, using a protractor, describe eight more radii, each 40° from the nearest radius.
Question

How can I divide a circle into seven equal parts?

360° ÷ 7 = 51.43°. Use a protractor to draw viii radii, each approximately 51.43° from each other.

Encounter more answers

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Video

Cheers for submitting a tip for review!

About This Commodity

Article Summary 10

To divide a circumvolve into six equal parts, commencement by drawing a line through the centre of the circumvolve starting on a point anywhere along the edge and ending at the reverse edge. Adjacent, draw two more than lines that divide half of the circle into three parts, making sure that the sections are equally equal as possible. So, extend those two lines into the other one-half of the circumvolve to the reverse edges to create 6 wedge shapes. For tips on dividing a circle into equal parts using a compass, read on!

Did this summary aid you?

Thanks to all authors for creating a folio that has been read 182,359 times.

Did this article help you?